PumpSwap liquidity: fees, LP tokens and deposits
How PumpSwap pools work, what share of each swap fee actually reaches liquidity providers, and the steps to deposit, track and withdraw PumpSwap liquidity.
In short
PumpSwap is pump.fun's constant-product AMM on Solana. To provide liquidity you deposit both tokens of a pool at its current ratio and receive LP tokens, which you later burn to withdraw your share of the reserves.
Every swap pays a fee split three ways: liquidity providers, the protocol and the coin creator. On pools of graduated pump.fun coins the split depends on the coin's market cap, and LPs get 0.20% of each swap in every tier except the smallest.
The LP share stays in the pool, so there is nothing to claim: your LP tokens redeem for more over time. There is no price range, no one-sided deposit and no deposit or withdrawal fee.
What is PumpSwap?
PumpSwap is the automated market maker run by pump.fun, and it is where a pump.fun coin trades once it leaves the bonding curve. pump.fun's own program README describes it as a constant-product AMM: the pool prices every swap from its two reserves using x × y = k, the same rule as Uniswap v2 or Raydium CPMM. When a coin's bonding curve completes, the pump.fun program creates its canonical PumpSwap pool, the one most trading flows through. Anyone can also create other pools for the same pair; the README notes that a pool address is derived from an index, the creator and the two mints, so one creator can open several pools for a single pair.
PumpSwap is separate from the pump.fun bonding curve, which has no LPs at all.
How do you use PumpSwap?
You use PumpSwap in one of two ways: you trade against its pools, or you provide the liquidity those trades use. A trade is a buy (quote token in, coin out) or a sell (coin in, quote token out), the two swap instructions the program README lists, made through any app that routes swaps to PumpSwap pools, pump.fun's own site included. Providing liquidity, being a PumpSwap LP, means depositing both tokens into a pool and earning a share of every trade's fee. The rest of this guide is about the second.
How does PumpSwap liquidity work?
PumpSwap liquidity works like any full-range constant-product pool: your deposit sits across every price from zero to infinity, and you own a fixed share of both reserves. The program has three liquidity instructions, all listed in the README:
- create_pool
- Opens a pool for a token pair. The first deposit's two amounts set the starting price, and the creator receives the first LP tokens.
- deposit
- Adds both tokens, up to a maximum of each, in exchange for an exact number of LP tokens. The two amounts always match the pool's current ratio.
- withdraw
- Burns an exact number of LP tokens and returns at least a minimum of each token, again in the pool's ratio.
The README is explicit that no fees are charged on deposit or withdraw; only buys and sells pay. There is no instruction for an LP to claim fees, because the LP share of each swap fee is left in the reserves. That raises what every LP token redeems for, so you realise your fees when you withdraw.
What are PumpSwap LP tokens?
A PumpSwap LP token is a fungible token minted by the pool (its lp_mint) that represents your share of that pool. Holding 1% of a pool's LP supply (burned LP still counts toward that supply) means you can withdraw 1% of each reserve. Because they are ordinary tokens, they sit in your wallet like any other balance, and whoever holds them controls the liquidity. Burning them outside a withdraw (the "LP burned" you see on launch dashboards) locks that liquidity in the pool for good.
How are PumpSwap fees split between LPs, the protocol and the creator?
Each PumpSwap swap fee is split between liquidity providers, the PumpSwap protocol and the coin's creator, and on canonical pools the split is set by the coin's market cap. pump.fun's fee program README says that since 1 September 2025 bonding curves and canonical PumpSwap pools use a dynamic fee structure computed from the market cap in SOL. Its published table runs from a 1.25% total fee for the smallest coins down to 0.30% for the largest:
- LPs get 0.20% of every swap from a market cap of 420 SOL upward, and only 0.02% below it, where most of the fee goes to the protocol.
- The coin creator gets the largest share early on (0.95% in the 420 to 1,470 SOL tier), stepping down to 0.05% at 98,240 SOL and above. The creator fee README covers how the creator collects it.
- The protocol takes 0.05% in every tier above the first.
Pools that are not canonical use flat rates from the fee program's config instead: 0.25% to LPs and 0.05% to the protocol at the time of writing (the program README still lists an older 20 bps / 5 bps default). All of these numbers are admin-set and the fee README says tiers can change, so check the live fee on the pool before you size a position on it.
Read the tier, not the headline fee
For a coin under 420 SOL of market cap, the total fee is 1.25% of the swap amount and the LP portion is 0.02% of the swap amount, 1.6% of the total fee. A high total fee does not imply a high LP yield.
A worked example
Hypothetical numbers: a canonical pool in the 420 to 1,470 SOL tier trades $200,000 in a day. At 0.20% to LPs, that is $400 added to the reserves for LPs. If you hold 2% of the LP supply, about $8 of it is yours. The traders paid 1.20% in total, or $2,400; the other $2,000 went to the creator and the protocol.
How do you provide liquidity on PumpSwap, step by step?
To provide liquidity on PumpSwap, fund a Solana wallet with both tokens and some extra SOL, find the coin's pool, deposit at the pool ratio, then hold the LP tokens until you withdraw. In lp.xyz the steps look like this.
Step 1: fund the wallet
Hold the coin, the quote token (usually SOL) and a little extra SOL for network fees and the token accounts the deposit opens. Never deposit your last SOL.
Step 2: find the pool by mint
Paste the coin's mint address into the search at app.lp.xyz. The hub lists its pools across every Solana venue, PumpSwap included, with liquidity, volume and fee side by side, so you can see whether the PumpSwap pool is where the volume actually is. Search by mint, not ticker: tickers are not unique.
Step 3: check the coin
A pump.fun coin can lose most or all of its value, and a working AMM does not protect the value of the token. lp.xyz shows mint and freeze authority, holder concentration and liquidity signals in the token header, and its pool audit blocks new deposits on a critical finding. The safety docs explain each check.
Step 4: enter one amount and sign
PumpSwap deposits are proportional, so the provide form asks for one side and fills in the other at the pool's ratio. The quote shows both amounts and the lp.xyz fee before you sign. If you manage several imported wallets, fan-out can make the same deposit from each of them in one flow (see add and remove liquidity). You receive LP tokens in each wallet that deposited.
Step 5: track the position
lp.xyz finds a wallet's PumpSwap LP tokens and lists them in the portfolio with the current value of your share. There is no in-range status to watch, because a PumpSwap position never leaves its range. What to watch is the coin itself and how your value compares with simply holding the two tokens.
Step 6: withdraw
Remove part or all of the position from the portfolio. The withdraw burns that share of your LP tokens and returns both tokens at the current ratio, fees included. Withdrawing is how you collect the fees your share has earned, since PumpSwap has no separate claim.
What does it cost to LP on PumpSwap?
PumpSwap itself charges nothing to deposit or withdraw. You pay Solana network fees, a small rent deposit for any new token account, and, through lp.xyz, 0.25% of the SOL leg of each add or remove. Creating a new pool through lp.xyz costs a flat 0.2 SOL on top. Every rate is on the fees page and in the quote before you sign.
Is PumpSwap legit?
PumpSwap is a real, working AMM run by pump.fun, the Solana token launchpad, and its program and fee rules are documented in public. pump.fun publishes the program address, its instructions, its accounts and its fee schedule in the pump-public-docs repository, and anyone can read the pools on-chain. That says the AMM is what it claims to be; it says nothing about the coins traded on it, which anyone can launch. Two facts worth knowing before you deposit: the program has an admin who can change fees and pause deposits, withdrawals or swaps, and the coin in your pool can lose most of its value regardless of how sound the AMM is.
What are the risks of PumpSwap liquidity?
The risks of PumpSwap liquidity are the coin going to zero, impermanent loss, a thin LP fee share, and admin control of the program.
- Coin risk. A pump.fun coin can lose most or all of its value. As the coin falls, the pool sells your SOL for it, so you end up holding more of the token that is falling.
- Impermanent loss. On a full-range pool a 2x price move either way leaves you 5.72% behind holding, before fees, and pump.fun coins routinely move far more than 2x. The impermanent loss guide has the formula.
- Small LP share. On canonical pools LPs receive 0.20% at most, from a fee where the creator can take several times that, so volume has to be high for fees to cover price moves.
- Admin control. The README lists admin instructions that can change the fee config and disable deposits, withdrawals or swaps globally.
Should you LP on PumpSwap or another Solana venue?
LP on PumpSwap when the coin's volume is there and you want a simple, passive, two-sided position; go elsewhere when you want a range, a one-sided order or fees you can claim. Many graduated coins also trade in Meteora, Raydium or Orca pools. A concentrated pool can earn more per dollar while price stays in range, and lets you place a single-sided wall that buys the coin only below a price you choose. The Solana LP guide compares every model.
Next steps
- How to provide liquidity on Solana: every pool model compared
- Meteora DAMM v2: launch pools with fee schedules
- How to provide liquidity on Raydium
- Risks and safety checks in lp.xyz
This guide is general information, not financial advice: providing liquidity can lose money, including all of what you deposit.

