How to provide liquidity on Solana: Meteora, Raydium, Orca

How liquidity provision works on Meteora, Raydium, Orca and PumpSwap, which pool model fits what you want to do, and the exact steps from funding a wallet to closing a position and getting your rent back.

lp.xyz team12 min read
SolanaGuide

In short

To provide liquidity on Solana, you deposit two tokens (or, on a concentrated pool, sometimes one) into an AMM pool on Meteora, Raydium, Orca or PumpSwap, and earn a share of the swap fees traders pay in that pool.

Solana pools come in two families. Constant-product pools (Raydium CPMM and AMM v4, PumpSwap, Meteora DAMM v1) cover every price, need both tokens and fold fees back into the pool. Concentrated pools (Orca Whirlpools, Raydium CLMM, Meteora DLMM) let you pick a price range, earn more per dollar while price stays inside it, and pay fees out as a separate balance you claim. Orca Splash pools are full-range Whirlpools: no range to pick, but fees still accrue to the position and you harvest them.

You need a Solana wallet holding SOL for transaction fees and for the refundable rent deposit a position account holds.

The main risks are impermanent loss, a concentrated range going out of range and earning nothing, and the token itself losing its value.

What does it mean to provide liquidity on Solana?

A liquidity provider (LP) deposits tokens into a pool so that traders can swap against them. A Solana AMM (automated market maker) is an on-chain program that prices each swap from the pool's balances instead of matching buyers and sellers in an order book. Every swap pays a fee, and that fee goes to the LPs whose liquidity the trade used, in proportion to their share. The trade-off is that the pool rebalances your deposit as price moves: you end up holding more of whichever token fell. Meteora's LP primer puts it plainly: you may not get back the same amounts you put in.

Which pool models can you provide liquidity to on Solana?

Solana's four main AMMs run eight pool models between them, and the model decides how you earn fees, whether you pick a range, and whether a one-token deposit is possible. A constant-product pool spreads liquidity across every price from zero to infinity using the x × y = k curve. A concentrated pool lets each LP place liquidity inside a chosen price range, so the same capital is deeper where trading happens.

Raydium CPMM
Constant product, LP tokens. Fees stay in the pool and raise what each LP token redeems for. Paired deposits only. Raydium's recommended program for new constant-product pools, with Token-2022 support.
Raydium AMM v4
Constant product, LP tokens, the original Raydium AMM with a 0.25% trade fee. Fees compound into the reserves. Paired only. Raydium now points new pools to CPMM.
PumpSwap
Constant product, fungible LP tokens. Where pump.fun tokens land when they graduate, though anyone can create a pool. The LP share of each swap fee stays in the reserves, so there is nothing to claim. Paired only.
Meteora DAMM v1
Constant product (plus stable pools), LP tokens. Fees accrue into the reserves and you realise them on withdraw. Constant-product pools are paired only. Idle SOL, USDC and USDT can earn lending yield through Meteora's vaults.
Orca Whirlpools
Concentrated, each position is an NFT with its own range. Fees accrue separately and you harvest them. One-sided deposits work when your range sits entirely above or below the price. Orca's Splash pools are a full-range, paired-only variant on the same Whirlpool program: still an NFT position, still harvested.
Raydium CLMM
Concentrated, NFT positions, ranges aligned to the pool's tick spacing. Fees are collected separately and don't auto-compound. One-sided when the range is outside the current price.
Meteora DLMM
Concentrated in discrete price bins. Only bins that swaps trade through earn fees, so a range that price has left earns nothing, and fees include a dynamic part that rises with volatility. Claimed separately. One-sided deposits are a core feature.
Meteora DAMM v2
Constant product with optional concentration: the pool creator can set one min/max price range for the whole pool, or run it full range. In compounding mode a set share of LP fees is reinvested into the pool. Positions are NFTs and the remaining fees are claimed. A pool can launch single-sided with only the base token; later deposits follow the pool's ratio.

Choose a constant-product pool when you want to deposit and mostly forget it: it never goes out of range. Choose a concentrated pool when you have a view on where price will trade, want more fees per dollar, or want to place a one-sided buy or sell wall. Concentrated positions need watching, because they stop earning the moment price leaves the range.

How to provide liquidity on Solana, step by step

Providing liquidity on Solana takes nine steps, and the order is the same on every venue: fund a wallet, find and vet the pool, choose the model and range, deposit, then monitor, harvest and eventually close.

Step 1: set up a wallet and keep SOL for fees and rent

You need a Solana wallet holding the tokens you plan to deposit plus some extra SOL. A transaction fee on Solana is a fraction of a cent, but opening a position also locks SOL as rent, a deposit every on-chain account must hold to exist. Orca lists position rent at about 0.0088 SOL, returned when you close. If your wallet is short of SOL the deposit simply fails, so never put your last SOL into the pool.

Step 2: find the pool for your token

Most tokens trade in several pools across different venues and fee tiers, and a pool's volume relative to its liquidity is what drives fees per dollar deposited. Search by the token's mint address rather than its ticker, since tickers are not unique. Compare 24-hour volume, total liquidity (TVL) and fee rate across the pools you find, and be wary of a pool with high TVL and almost no volume.

Step 3: check the pool and the token before you deposit

Most money lost around AMMs is lost to the token, not to the AMM. Before depositing, check whether the token's mint authority can still create supply, whether a freeze authority can lock your balance, how much of the supply the top wallets hold, and whether the pool's LP tokens are locked or burned. lp.xyz shows the authority, holder concentration, liquidity lock and age signals in the token header and runs a pool audit that blocks new deposits on a critical finding; the safety docs explain each check. For Token-2022 mints, also check for transfer fees and transfer hooks, which can change what you actually receive.

Step 4: pick the pool model and fee tier

The fee tier is the percentage every swap pays, and on concentrated pools it also sets the tick spacing (the smallest price step a range edge can sit on). Orca, for example, runs tiers from 0.01% (tick spacing 1) for pegged pairs up to 2% (tick spacing 256) for exotic pairs, with 0.30% (spacing 64) for standard volatile pairs, according to its docs. On Meteora DLMM the equivalent is the bin step, the price gap between neighbouring bins in basis points, fixed when the pool is created. Higher fees suit volatile or long-tail pairs; lower fees win volume on stable and blue-chip pairs. In practice, LP into the tier where the volume already is.

Step 5: choose a price range (concentrated pools only)

A price range is the band of prices where your liquidity is active; outside it the position holds one token and earns nothing. A narrow range earns more while price stays inside and converts faster when it leaves. Here is a worked example with hypothetical numbers.

Say SOL is at $150 and you deposit $1,000 into a SOL/USDC concentrated pool with a range of $120 to $187.50 (20% below and 25% above, which centres the range on $150 geometrically: its edges multiply to the price squared). You deposit about 3.33 SOL and 500 USDC. That position provides about 9.5 times the liquidity of the same $1,000 spread over the full range, so while SOL trades between $120 and $187.50 it earns roughly 9.5 times the fees a full-range deposit would.

  • If SOL falls to $120, the pool has sold all your USDC for SOL. You hold about 7.06 SOL worth $847.21, against $900.00 had you simply held 3.33 SOL and 500 USDC. The $52.79 gap is impermanent loss (before fees).
  • If SOL rises to $187.50, the pool has sold all your SOL. You hold about 1,059.02 USDC, against $1,125.00 had you held. You captured some of the rise, not all of it.
  • Beyond either edge, the position earns no fees until price comes back.

On Meteora DLMM you also choose a shape: Spot spreads liquidity evenly across the bins, Curve concentrates it near the current price, and Bid-Ask weights it toward the edges. The DLMM strategies guide covers when each one fits.

Step 6: deposit and sign

On a constant-product pool you enter one amount and the other fills in at the pool's current ratio; you receive LP tokens. On a concentrated pool the range decides the ratio: a range centred on the price takes both tokens, and a range entirely above or below the price takes only one. Set slippage tolerance, check the amounts and the rent shown in the wallet prompt, and sign. If your wallet warns that the transaction will fail in simulation, stop and find out why.

Step 7: monitor the position

A concentrated position needs a check whenever price moves meaningfully, because the question that matters is whether it is still in range. A constant-product position mainly needs watching for token risk. Track three numbers: current value against what you would hold had you not LP'd, fees earned, and in-range status.

Step 8: harvest fees

Harvesting means claiming accrued fees while leaving the position open, and it only exists on models with NFT positions (Orca Whirlpools and Splash, Raydium CLMM, Meteora DLMM and DAMM v2). On Raydium CPMM, AMM v4, PumpSwap and Meteora DAMM v1, fees compound into the pool and you collect them when you withdraw. Each claim is a transaction, so Raydium's own liquidity guide advises waiting until the pending amount is meaningful.

Step 9: remove liquidity and close the position

Removing liquidity returns your share of the pool's tokens at the current price, plus any fees. On a constant-product pool you burn LP tokens for the underlying. On a concentrated pool, a full close withdraws the liquidity, collects pending fees, burns the position NFT and returns the position's rent deposit to your wallet. A partial decrease keeps the position open, so the rent stays locked until you close it.

How to provide liquidity on Meteora, Raydium, Orca and PumpSwap

The steps above apply to every Solana venue; what differs is the vocabulary and a few venue-specific rules.

Meteora

To provide liquidity on Meteora, pick DLMM for an active, ranged position (choose a bin range and a Spot, Curve or Bid-Ask shape), or DAMM for passive constant-product liquidity. On DLMM, only bins that swaps trade through earn fees, so a range that price has left earns nothing. Meteora's DLMM overview notes that bin steps go up to 400 basis points. For the pool type many new launches use, see the Meteora DAMM v2 guide.

Raydium

To provide liquidity on Raydium, use CPMM for a simple paired deposit (enter one amount, the other auto-fills, receive LP tokens) or CLMM for a ranged NFT position. To remove LP on Raydium, withdraw LP tokens on CPMM, or decrease liquidity to zero and close on CLMM. Raydium fees are not all yours: on the example CPMM config in Raydium's fee docs, a 0.25% pool sends 12% of the trade fee to the protocol and 4% to a fund, so LPs keep 84% ($2.10 of every $2.50 in fees on a $1,000 swap). Rates are set per config, so check the pool you choose. The Raydium guide compares CPMM, CLMM and AMM v4 in full.

Orca

Orca liquidity is either a Whirlpool (concentrated, you set the range) or a Splash pool (full range at 1%, simplest for a new token). Orca also uses adaptive fees that raise the rate during volatility on pools that enable them. Range edges must be multiples of the pool's tick spacing. The Orca guide lists every fee tier and what a position costs in rent.

PumpSwap

PumpSwap liquidity is always paired and proportional, so there is no range, no one-sided deposit and no claim button: your LP tokens simply redeem for more over time as the LP share of swap fees builds up in the reserves. Swap fees are split between LPs, the protocol and the coin creator, and the split can vary, so read the live rate on the pool rather than trusting a number from a guide. The PumpSwap guide walks through how that split works.

What does it cost to provide liquidity on Solana?

Providing liquidity on Solana costs a small network fee per transaction, a refundable rent deposit per position, and any fee the app you use charges on top.

Network fee
A base fee per signature plus an optional priority fee during congestion. Orca lists a standard transaction at about 0.000005 to 0.00001 SOL.
Position rent
A deposit held by the position account (about 0.0088 SOL for an Orca position). Returned when you fully close the position.
Array setup
Occasionally a range needs a new on-chain tick array or bin array. A new Orca tick array costs about 0.002 SOL, not refundable (Orca's fee page still quotes 0.07 SOL, the older fixed-size array). It is uncommon on active pools.
Pool creation
Only if you create the pool yourself. Raydium budgets about 0.2 SOL for a CPMM pool's rent, token accounts and priority fees.
lp.xyz fee
0.25% of the SOL leg (or the stablecoin leg, if the pool has no SOL side) of an add or remove built through lp.xyz, 5% of the SOL side of fees you harvest, and a flat 0.2 SOL to create a pool. Shown in the quote before you sign; full list on the fees page.

Example: depositing 3.33 SOL and 500 USDC through lp.xyz costs about 0.0083 SOL in platform fee (0.25% of the SOL side), plus the network fee and the rent deposit you get back on close. Every rate is on the fees page.

What are the risks of providing liquidity on Solana?

The risks of providing liquidity on Solana are impermanent loss, out-of-range positions, the token itself, and the smart contracts involved.

  • Impermanent loss. When price moves, the pool leaves you with more of the token that fell, as the $150 SOL example shows. Fees are what pay you for it, and they do not always cover it. The impermanent loss guide works through the maths.
  • Going out of range. A concentrated position outside its range is 100% one token, still exposed to its price, earning nothing.
  • Token risk. A token that goes to zero takes the pool with it. Mint and freeze authorities, holder concentration and unlocked liquidity are the warning signs.
  • Contract and config risk. AMM programs can have bugs, and venue fee configs are admin-set and can change.
  • Cost drag. Frequent harvesting and repositioning on a small position can cost more than it earns, even at Solana prices.

How lp.xyz handles Solana liquidity across venues

lp.xyz is a non-custodial terminal that shows a token's pools across Meteora, Raydium, Orca and PumpSwap in one search, with one provide form that adapts to each model. You can drag a range on the chart, see the token split before you sign, post a one-sided wall on Orca, Raydium CLMM or Meteora DLMM, and harvest, add, reposition or remove from one positions list. Raydium AMM v4 pools are shown but new deposits go through CPMM and CLMM. See add and remove liquidity and create a pool for the details, or start at app.lp.xyz.

Next steps

This guide is general information, not financial advice: providing liquidity can lose money, including all of what you deposit.

More guides

Start provisioning.

Connect a wallet and LP across 6 AMMs on Solana and EVM from one place.