Raydium liquidity pools: CPMM, CLMM and AMM v4
Raydium runs three kinds of liquidity pool. How CPMM, CLMM and the legacy AMM v4 pay LPs, what their fee tiers are, and the steps to add and remove Raydium liquidity.
In short
Raydium is a Solana AMM with three pool programs. CPMM is its standard constant-product pool and the one Raydium recommends for new pools. CLMM is its concentrated-liquidity pool, where you pick a price range and hold an NFT position. AMM v4 is the original pool, still trading but no longer recommended for new pools.
On CPMM and AMM v4 you deposit both tokens, get LP tokens, and fees build up in the pool. On CLMM fees collect on your position and you claim them. Part of every Raydium swap fee goes to the protocol, so LPs keep 84% to 88% of it depending on the pool type.
What are Raydium liquidity pools?
A Raydium liquidity pool is a Solana program account holding two tokens that traders swap against, paying a fee to the LPs who funded it. Raydium has three programs for this, and which one a pool runs on decides how you deposit and how you earn:
- CPMM
- Constant product (x × y = k), fungible LP tokens, paired deposits only. Raydium's CPMM docs call it the recommended program for new constant-product pools, with first-class Token-2022 support, including tokens with transfer fees.
- CLMM
- Concentrated liquidity. Each position is an NFT with its own price range, and Token-2022 is supported with some caveats. One-sided deposits work when your range sits entirely above or below the price.
- AMM v4
- The original Raydium constant-product AMM. Its docs say it is no longer recommended for new pools, it only accepts classic SPL tokens, and its old OpenBook order-book dependency has been removed from the program. Many older tokens still trade here.
Raydium CPMM vs CLMM vs AMM v4: which should you LP?
LP a CPMM or AMM v4 pool when you want a passive position that never goes out of range, and a CLMM pool when you want more fees per dollar in a range you are prepared to watch. In practice the choice is often made for you by where a token's volume is: a pool with deep liquidity and no trading pays little whatever the model.
One note on AMM v4 in lp.xyz: you can find and inspect AMM v4 pools, but lp.xyz builds no deposits or withdrawals for them, so new liquidity goes through CPMM or CLMM. To withdraw an existing AMM v4 position, use Raydium itself.
How do Raydium fees work for LPs?
Every Raydium swap pays the pool's fee rate, and that fee is split between LPs and the protocol. The split differs by program:
- AMM v4
- A 0.25% fee: 0.22% to LPs and 0.03% to the protocol, per the AMM v4 fee page. LPs keep 88%.
- CPMM
- Fee tiers are set per config. On the 0.25% config in the CPMM fee docs, 12% of the fee goes to the protocol and 4% to a fund, so LPs keep 84%: about $2.10 of every $2.50 in fees on a $1,000 swap. A separate pool creator fee, charged on top of the trade fee, applies only if the pool turned it on at creation.
- CLMM
- Tiers from 0.01% to 4%. Each config fixes its tick spacing: 1 for tiers up to 0.05%, 10 from 0.10% to 0.20%, 60 from 0.25% to 0.80% and 120 from 1% up, per the CLMM fee docs and Raydium's live config list. The same 84% to LPs applies.
Raydium's protocol fee page describes the protocol share as funding RAY buybacks. All of these rates are admin-set configs and can change, so read the live fee on the pool you pick rather than trusting a number from a guide, this one included.
Where do the fees go: into the pool or onto your position?
On CPMM and AMM v4, the LP share of each fee is added to the reserves, so each LP token redeems for more over time and you collect fees by withdrawing. On CLMM, Raydium's liquidity guide says fees accrue on the position and do not auto-compound: they sit beside your liquidity until you claim them.
How do Raydium CLMM ranges and tick spacing work?
A Raydium CLMM range is a lower and upper price, and both edges must land on the pool's tick spacing. Raydium's ticks and positions page states that a position's ticks must be multiples of the spacing or the transaction fails. A 0.01% pool (spacing 1) allows very fine ranges for pegged pairs; a 1% pool (spacing 120) uses coarser steps suited to volatile tokens. While price is inside your range you earn fees on every swap; outside it your position is entirely one token and earns nothing until price returns.
A range wholly below the price holds only the quote token and buys the base token as price falls into it; a range wholly above holds only the base token and sells it as price rises. That is a single-sided wall, a range order that earns fees while it waits.
How do you provide liquidity on Raydium, step by step?
To provide liquidity on Raydium, fund a Solana wallet, find the pool, choose CPMM or CLMM, deposit and sign, then harvest (CLMM) and remove when you are done. The steps in lp.xyz:
Step 1: fund the wallet
Hold both tokens, or one for a wall, plus SOL for network fees and the refundable rent a new CLMM position account takes.
Step 2: find the pool by mint
Paste the token's mint at app.lp.xyz. The hub lists its Raydium pools of every type next to its Meteora, Orca and PumpSwap pools, with volume, liquidity and fee rate side by side. Check the token header and the pool audit before depositing.
Step 3a: deposit into a CPMM pool
Enter one amount; the other fills in at the pool's ratio. Sign, and you receive LP tokens. That's the whole position.
Step 3b: open a CLMM position
Drag the range on the chart or type its edges; lp.xyz snaps them to the pool's tick spacing and shows how the deposit splits between the two tokens. A range on one side of the price takes one token only. Sign, and the position NFT lands in your wallet.
Step 4: harvest CLMM fees
Claim fees from the portfolio while the position stays open, or turn on autoharvest. Each claim is a transaction, so Raydium advises waiting until the pending amount is meaningful. When price leaves your range, reposition closes the position and reopens it around the current price, or trailing automation can follow price for you.
Step 5: remove
On CPMM, withdraw part or all of your LP tokens for both underlying tokens. On CLMM, removing everything also collects pending fees, burns the NFT and returns the position's rent.
Can you create a Raydium pool in lp.xyz?
Yes, CPMM or CLMM. The create form reads Raydium's live fee configs for the model you pick, so the tiers you see are the ones the program accepts, and it seeds your first deposit in the same flow. Raydium's protocol fee page lists a 0.15 SOL creation fee for CPMM and AMM v4 pools and none for CLMM, on top of account rent.
What does it cost to LP on Raydium?
Raydium charges LPs nothing to add or remove; its share comes out of swap fees. Through lp.xyz you pay 0.25% of the SOL leg (or the stablecoin leg, if the pool has no SOL side) of an add or remove, 5% of the SOL side of fees you harvest, and a flat 0.2 SOL to create a pool, all shown before you sign and listed on the fees page.
What are the risks?
- Impermanent loss. Price moves leave you holding more of whichever token fell; a narrow CLMM range magnifies it. See the impermanent loss guide.
- Out of range. A CLMM position outside its range earns nothing.
- Token risk. Check mint and freeze authority, holder concentration and transfer fees on Token-2022 mints before depositing.
- Config changes. Raydium's fee configs are admin-set and can change after you deposit.
Next steps
- How to provide liquidity on Solana: every pool model compared
- How to provide liquidity on Orca
- LP strategies: range width, rebalancing and when not to LP
- Add and remove liquidity in lp.xyz
This guide is general information, not financial advice: providing liquidity can lose money, including all of what you deposit.

