Meteora DLMM strategies: Spot, Curve, Bid-Ask and bin step
A Meteora DLMM strategy comes down to three choices: the pool (its bin step and fee), the range (how many bins), and the shape (Spot, Curve or Bid-Ask). This guide shows how each one changes what you earn and what you end up holding, with the bin math worked through.
In short
Meteora DLMM splits a pool into price bins. Only the bins that swaps trade through earn fees, and a position that price has left earns nothing and sits entirely in one token.
Spot spreads your deposit evenly and is the safe default. Curve stacks it near the current price, so it earns the most while price stays put and goes out of range fastest. Bid-Ask stacks it at the edges, so it buys more the further price falls and sells more the further it rises.
Range width is bins times bin step: at a 25 bps bin step, Meteora's default 69-bin position covers about -8.1% to +8.9% around the price; at 100 bps it covers about -28.7% to +40.3%.
Use Curve or a narrow Spot for calm, ranging pairs, a wide Spot or Bid-Ask for volatile ones, and a one-sided Bid-Ask to DCA into or out of a token. In a strong trend, a two-sided position mostly converts into the losing side.
What is Meteora DLMM?
Meteora DLMM (Dynamic Liquidity Market Maker) is a concentrated-liquidity AMM on Solana that organises liquidity into discrete price bins instead of one continuous curve. Each bin holds liquidity at a single fixed price and works as a tiny constant-sum market: inside a bin, liquidity is L = P × x + y, so a swap that stays inside one bin trades at exactly that bin's price with no price impact. When a swap uses up a bin, the pool moves to the next one, and that is how the price changes.
- The active bin is the one bin the current price sits in. It is the only bin that can hold both tokens.
- Bins above the active bin hold only the base token (token X, for example the memecoin or SOL). Bins below hold only the quote token (token Y, for example SOL or USDC). As price rises through your bins, they sell your base token for quote; as it falls, they buy.
- Bin step is the price gap between neighbouring bins, in basis points (1 bps = 0.01%). It is set when the pool is created and can't change, which is why the same pair can have several DLMM pools with different bin steps.
- A position is a dedicated account that records which bins you hold and your share of each, not a fungible LP token or an NFT. Fees and rewards accrue to that account and stay there until you claim them; they do not compound automatically.
The mechanics above come from Meteora's own What is DLMM and DLMM formulas pages, its pool creation guide (bin step is fixed at creation) and its Dynamic Positions docs (the position account), which are worth reading in full if you plan to LP seriously.
How do Meteora DLMM fees work?
Every Meteora DLMM swap pays a base fee plus an optional variable (dynamic) fee, and the total is capped at 10%. The base fee is fixed by the pool's configuration and scales with its bin step, so wider-step pools for volatile tokens usually charge more per trade. The variable fee rises when swaps cross many bins or arrive in quick succession, and decays back once the market calms down.
- Who earns it: fees accrue to the liquidity in the bins a swap actually trades through. A small swap that stays in the active bin pays only the LPs in that bin; a large swap that crosses ten bins pays LPs across all ten.
- What LPs keep: on a standard DLMM pool the protocol takes 10% of the trading fee and LPs get 90%; on a Launch Pool the split is 20% / 80%, per Meteora's formulas page.
- Why the dynamic fee matters: the periods when price moves fastest are exactly when LPs take the most inventory risk. A pool with variable-fee parameters charges more in those moments, which partly pays you for that risk. It does not remove it.
A practical read on a pool's fee yield is its 24h fee / TVL ratio: fees earned in the last day divided by the liquidity in the pool. Meteora's terminal shows it per pool and per position, and the pools table on an lp.xyz token page shows the same fee-to-TVL ratio for every pool of the token across venues. It is backward-looking, so treat it as evidence of recent demand, not a forecast.
How does bin step set your range width?
A Meteora DLMM range is a count of bins, and the bin step turns that count into a price range. Each bin is the previous one times (1 + bin step / 10,000), so the price n bins away from today's price is:
Bin price formula
price after n bins = current price × (1 + binStep / 10,000)n, with n negative for bins below the price.
Say SOL is at $150. In a 25 bps pool the next bins up are $150.38, $150.75 and $151.13. In a 100 bps pool they are $151.50, $153.02 and $154.55. The same number of bins covers a very different distance:
- 25 bps step
- Default 69-bin position (34 bins either side of the active bin) spans about $137.79 to $163.29, or -8.1% / +8.9%. Reaching +10% takes about 38 bins; +30% takes about 105.
- 100 bps step
- The same 69 bins span about $106.95 to $210.39, or -28.7% / +40.3%. Reaching +10% takes about 10 bins; +30% takes about 26.
- What it means
- A small step gives fine price granularity and suits stable or very liquid pairs. A large step lets one position cover a big move with few bins and suits volatile tokens, at the cost of coarser fills.
Two things follow. First, “69 bins” is not a strategy on its own: always convert it into a percentage range for the pool you are in. Second, spreading the same deposit over more bins puts less in each, so a wider range earns less per dollar while price is inside it. Meteora's strategies page makes the same trade-off explicit for its named presets.
What do Spot, Curve and Bid-Ask do?
Spot, Curve and Bid-Ask are the three ways Meteora DLMM distributes a deposit across the bins in your range: evenly, peaked at the current price, or weighted toward the edges. The shape decides where your money is when trades happen, so it changes both how much fee you capture and how your inventory changes as price moves.
- Spot
- The same amount in every bin. Fee capture is steady anywhere in the range and inventory converts at an even pace as price moves. Meteora's terminal guide calls it a good default if unsure; Meteora's Spot-Concentrated (1-3 bins), Spot-Spread (20-30 bins) and Spot-Wide (around 50 bins) presets are Spot with different range widths.
- Curve
- Most liquidity in the bins nearest the current price, tapering toward the edges. The highest fee capture per dollar while price stays close, and the most out-of-range risk: once price drifts, the bins that held most of your capital have converted and the edges hold little. Fits stable pairs and calm, ranging markets.
- Bid-Ask
- The inverse of Curve: little near the current price, more toward the edges. Earns less in a quiet market, and converts the most inventory on large moves, which is what you want for buying dips or selling rips. Fits volatile pairs and one-sided DCA ladders.
The exact weights lp.xyz uses
lp.xyz uses the same three names, Spot, Curve and Bid/Ask, and they map one-to-one to Meteora's Spot, Curve and Bid-Ask. On Meteora DLMM, lp.xyz passes your choice to Meteora's SDK strategy type. On the tick-based venues (Uniswap v3 and v4, PancakeSwap v3 and Infinity CL), where no native shape exists, lp.xyz builds the shape itself as a ladder of positions using simple linear weights. For a 7-bin two-sided range with the price in the middle bin, those weights are:
- Spot
- 14.29% in every bin.
- Curve
- 6.25%, 12.5%, 18.75%, 25%, 18.75%, 12.5%, 6.25%. Weight falls by one step per bin of distance from the price.
- Bid/Ask
- 21.05%, 15.79%, 10.53%, 5.26%, 10.53%, 15.79%, 21.05%. Weight rises by one step per bin of distance from the price.
For a one-sided ladder the anchor is the edge nearest the price, so Curve becomes a ramp that is heaviest next to the price and Bid/Ask a ramp that is heaviest furthest from it. Every bin always gets some weight, so no rung is left empty. The shapes docs cover where each venue supports a shape.
Which Meteora DLMM strategy fits which market?
The right Meteora DLMM strategy depends on what you expect price to do next, because each shape is a bet on where trading will happen. A quick map:
- Ranging / stable
- Price oscillates inside a band, or the pair is pegged. Use a small bin step and Curve, or a narrow Spot. Highest fee capture, but watch it: a break out of the band leaves you out of range quickly.
- Mean-reverting, volatile
- Big swings that tend to come back. Use a wide Spot, or a two-sided Bid-Ask so you buy more on the deep dips and sell more on the spikes. A larger bin step keeps the bin count manageable.
- Trending
- A two-sided position in a steady trend is the weak case: it sells your base token all the way up, or buys it all the way down, and then stops earning. If you want exposure, use a one-sided ladder in the direction you are happy to trade, or don't LP that pool.
- Launch
- Price discovery with heavy volume and wide swings. Wider ranges and larger bin steps, and pools with dynamic fees so volatile periods pay more. Check the token itself before anything else.
- DCA in
- Quote token only (SOL or USDC), in bins below the price, usually Bid-Ask. As price falls, the quote converts into the token, buying more the lower it goes.
- DCA out
- Base token only, in bins above the price. As price rises, your tokens sell into quote. Bid-Ask sells more at the higher prices.
Worked example: a one-sided DCA ladder
A one-sided Meteora DLMM ladder is the clearest way to see what the shape changes. Say SOL is at $150 in a 100 bps SOL/USDC pool and you put $1,000 of USDC into the five bins just below the price. Those bins sit at $148.51, $147.04, $145.59, $144.15 and $142.72. Using the linear weights above (illustrative; Meteora's SDK lays down its own distribution on DLMM), and before fees:
- Spot
- $200 in each bin. If price falls through all five: 6.8694 SOL at an average $145.57. If price only reaches the second bin: $400 spent for 2.7068 SOL, average $147.78.
- Curve
- $333.33 in the top bin down to $66.67 in the bottom one. All five fill: 6.8238 SOL, average $146.55. Only two fill: $600 spent for 4.0580 SOL, average $147.86.
- Bid-Ask
- $66.67 in the top bin up to $333.33 in the bottom one. All five fill: 6.9149 SOL, average $144.61. Only two fill: $200 spent for 1.3556 SOL, average $147.53.
The pattern generalises. Curve deploys the most capital on a shallow dip, at a worse average price. Bid-Ask holds most of its capital back for a deep dip and gets the best average if it comes, but buys little if it doesn't. Spot sits between them. Because each DLMM bin trades at one fixed price, these fills are exact at the bin prices, which is what makes DLMM well suited to ladders.
A filled ladder can unfill
Liquidity that has converted stays in the pool. If price comes back up through your bins, they sell the SOL you just bought back into USDC. To keep the fill, withdraw once price has traded through. On lp.xyz, Withdraw on fill does that for a wall automatically; see automation.
How does single-sided liquidity work on Meteora?
Single-sided liquidity on Meteora DLMM means depositing only one token into bins entirely above or entirely below the active bin. Because bins above the price can only hold the base token and bins below can only hold the quote token, a one-token deposit there is a native position, not a workaround.
- Ask side: base token in bins above the price. It works like a sell order spread across the range, and it earns fees as it fills.
- Bid side: quote token in bins below the price, the mirror image: a buy order that earns fees as it fills.
- In Meteora's app, you turn off Auto-Fill and enter an amount for one token only. Meteora also notes you can't withdraw single-sided from the active bin, because it holds both tokens.
- On lp.xyz, the Buy wall and Sell wall actions open the same provide form already set to one side of the price, with the shape picker available on DLMM. The walls docs and the single-sided liquidity guide go deeper.
What are Meteora DLMM position limits and costs?
A Meteora DLMM position starts with a 70-bin layout and can grow to a maximum of 1,400 bins, according to Meteora's Dynamic Positions docs. Meteora's app opens a 69-bin position centred on the price by default, and you widen it by typing a min and max price.
- Resizing: a position can grow or shrink its range without being closed. Each resize instruction can allocate at most 91 new bins beyond the default 70, so growing toward 1,400 takes several instructions, and shrinking only removes empty bins.
- Bin arrays: bins are stored in arrays of 70. If your range touches bins whose array doesn't exist yet, someone has to create it.
- Rent: Meteora's terminal guide separates refundable rent (position creation and extension, returned when you close the position) from non-refundable rent (creating new bin arrays). Ranges far from where others provide are the ones most likely to need new bin arrays.
- Fees are not auto-compounded: you claim them, and a claim is a transaction.
What should you do when price leaves your DLMM range?
A Meteora DLMM position that price has left stops earning fees and is held entirely in one token: all base if price went below your range, all quote if it went above. That is the model working as designed. You have three choices, and each has a cost.
- Wait if you expect price to come back. If it returns into your range, the position starts earning again, and a full round trip back to your entry price undoes the conversion.
- Rebalance (re-centre the range on the current price). This turns the conversion into a realised loss, costs transactions and possibly a swap, and can repeat. A naive “re-centre every time it goes out of range” rule locks in losses in choppy markets; the LP strategies guide works through why with numbers.
- Remove and take the outcome, for example when the out-of-range side is the token you wanted anyway.
Meteora's app has a one-click Rebalance, and its dynamic positions can widen a range in place. On lp.xyz the portfolio marks out-of-range positions and offers Reposition, and walls can use Follow price, which only moves a wall after it has been out of range for a dwell window you set and caps the moves per day.
Can you simulate a DLMM position before depositing?
You can simulate the deterministic part of a Meteora DLMM position by hand: the bin prices from the formula above, how much lands in each bin for your shape, and what you would hold if price moved to any given bin. Each bin trades at a fixed price, so the inventory at any price is exact arithmetic, as the ladder example shows. What no simulator can tell you is future volume, the dynamic fee you will be paid, or how much other liquidity will compete in your bins.
Both venues' interfaces show the deterministic part before you sign. Meteora's terminal draws your bins against the pool's existing liquidity. On lp.xyz you drag the range on the price chart, see the shape's bins and the pool's depth silhouette beside it, and see how the deposit splits between the two tokens before the wallet signs.
Meteora DLMM strategy checklist
- Check the token first: mint and freeze authorities, holder concentration, and whether the volume is real. See LP risks.
- Pick the pool on recent fee / TVL and a bin step that suits the token's volatility.
- Convert your bin count into a percentage range with the formula, for that pool's bin step.
- Pick the shape for your market view: Curve for ranging, Spot when unsure, Bid-Ask for volatility and ladders.
- Decide in advance what you will do when price leaves the range, and what it will cost.
- Claim fees when they are worth more than the transaction, and remember that fees are payment for the inventory risk, not profit on top of it.
Related
- LP strategies: how to pick a range, when to rebalance and when not to LP
- Impermanent loss in concentrated liquidity, worked through with numbers
- How to provide liquidity on Solana
- Liquidity shapes on lp.xyz
This guide is educational, not financial advice: providing liquidity can lose money, including through impermanent loss, out-of-range positions and the token itself going to zero.

